US-828 Snapper、Snap Action
CMJ・UL・C-UL・VDE(EN(60730A)approved
① Thermostat Specifications | |||
---|---|---|---|
Electrical ratings | A type : 125 VAC, max. 16A, resistance load A type : 250 VAC, max. 10A, resistance load ‐‐ (min. 200mA) |
||
Ⅰ.Temperature setting range
Ⅱ.Temperature tolerance |
Ⅰ.Temperature setting range 180 ~ 290℃ |
Ⅱ.Temperature tolerance ±10℃以上 |
|
Circuit resistance(initial value) | 50 mΩ or less | ||
Insulation resistance | 100 MΩ or greater [through the 500 VDC megger] | ||
Withstand voltage | 1,500 VAC/minute | ||
Thermal resistance | 300℃ | ||
Cold resistance | -20℃ | ||
Opening-closing durability | (With S.O.D. spacefication) 3 times or more [under rated load] |
※Please contact specification of the approved models are slightly different from those shown above.
② Model code | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||
1 | Contact material | A : AgNi alloy contact | ||||||||||||
2 | Contact model | X : “OFF” for temperature rise | ||||||||||||
3 | Terminal model | A: Splices for the crimping (Non-insulate Pin type) B: Splices for the crimping (Non-insulate Sleeve type) Applicable wire AWG14 to 16 |
||||||||||||
4 | Cover materials model | B: Aluminum (no hole) | ||||||||||||
5 | Base model | S: Standard |
③ Sample of Model code
- US-828AXAB-S AgNi alloy contact、Clinching type terminals、Aluminum cover (no hole)
- US-828AXBB-S AgNi alloy contact、Sleeves terminal(Horizontal)、Aluminum cover (no hole)
④ List of international safety standards
Model / Type | Agency | File No. | Operating temp. Ratings |
Number of cycles | Max. | Max. Amperes | ||||
---|---|---|---|---|---|---|---|---|---|---|
Category | cycles | Volts |
Resistiveload |
Inductiveload |
FLA | LRA | ||||
US-828A | UL C-UL |
E52529 | 290 | S.O.D. | 1 | AC 250 | 16 | – | – | – |
US-828A | TUV | R50228951 | 290 | S.O.D | 1 | AC 250 | 16 | – | – | – |